DETROIT

OPEN 3D FILES

Our MDF is HMR (High Moisture Resistant) and has core in green color. All our products are manufactured in accordance with the European standard EN622, and are supplied only from suppliers with FSC certification.

• MDF (unlike natural wood) is a material without defects, it does not twist, crack or knot
• MDF boards have a longer service life and are the most cost effective material

The HMR MDF boards that we use for the production of moldings have been tested according to the test module V313 (Wet Cyclic Test). This test was specially developed to indicate the degree of moisture resistance of MDF. MDF boards must withstand 3 days in water at 20C, 1 day in freezing -12C, 3 days in an oven at 70C.

• We guarantee the stability of our boards up to an air humidity of 75%


• The slats are finished with a base color and several layers of RAL paint. This treatment increases water resistance and is incomparable to MDF strips that are glued with foil (the foil does not protect the board from water or other unwanted effects)

Floorboards milled from our HMR MDF are highly durable as they have the highest degree of compression pressure.

• This means that our moldings are of the highest possible quality and are impact resistant

For an accurate calculation, you can send us a floor plan and we will immediately send you a calculation.

We recommend increasing the volume by 10% for the cut.

For the Prague area and its surroundings, we can recommend a company that only deals with the installation of lacquered moldings.

If you have any questions about the installation, you can contact us. We will be happy to advise you.

We will deliver the slats anywhere you want within the EU. We price the transport according to the carrier's price list.